The integrated high-voltage powertrain / single-speed transmission unit is failing, causing severe mechanical chattering, rapid actuator cycling, and vibration under the vehicle. This failure follows a recent catastrophic, unexplained total loss of traction/HVAC coolant while at a previous Audi dealership. Audi is aware of systemic coolant migration issues into the electric drive motors on 2022 e-tron models under Technical Service Bulletin (TSB) #2073858, where coolant breaches internal seals and compromises the gearbox oil, causing mechanical failure. The current dealership has taken a fluid sample but refuses to share the results, denying a high-voltage drivetrain warranty submission and demanding I pay out-of-pocket for a standalone "transmission" failure. Crucially, the dealership has explicitly documented on my file that "driving the car further will cause further damage," yet they are forcing me to pick up and drive this un-diagnosed, potentially hazardous vehicle off the lot on Monday. If the high-voltage motor shorts due to internal fluid contamination while driving, it creates a severe safety risk of a sudden loss of propulsion on active roadways.

Source: NHTSA complaint ODI #11749758 · view all complaints for this vehicle at nhtsa.gov

Running 4430 MMI/MIB3 software (that was release almost 2 years ago) and now have stereo EQ settings that reset on their own, personalized favorites that delete on their own, and other personalization settings that reset on their own. Happens every 6-24 hours if settings are adjusted. Audi knows about it, refuses to allow dealers to update to newer software that will fix these since there are updated available that solves.

Source: NHTSA complaint ODI #11742710 · view all complaints for this vehicle at nhtsa.gov

Component/System: Service Brakes, Hydraulic / Brake Pedal Assembly / Steering Linkage Description of Defect: A progressive mechanical noise and physical sensation occurs during driving transitions involving the brake, accelerator, and steering column. After the brake pedal is fully released and the accelerator is pressed, or when the steering wheel is turned, a distinct loud "thunk" and a sliding/dragging sound emanate from the brake pedal assembly area. When the accelerator is released, a secondary "click" sound is heard and felt through the controls. This condition did not exist when the vehicle was new and has progressively worsened in frequency and volume. The symptoms suggest a binding mechanical linkage, failing master cylinder pushrod bushing, or interference with the steering column shaft, potentially compromising braking response or causing pedal entrapment. Safety Risk: The physical sliding sensation and mechanical degradation pose a severe safety risk. Mechanical binding or un-isolated movement within the pedal box can cause unexpected resistance or delay when transitioning to emergency braking, increasing stopping distances or causing total failure of the brake pedal to actuate or return properly, increasing crash risk. Dealer / Manufacturer Actions: The vehicle was presented to an authorized Audi dealership. Comprehensive video and audio evidence explicitly capturing the exact "thunk," dragging noise, and click during vehicle operation was sent directly to dealership staff. Despite having irrefutable video confirmation of the defect, the dealer has refused to properly diagnose or address the issue. The dealership is now completely ignoring all communication, failing to return calls, and disregarding this critical safety defect. Warning Symptoms: No electronic dashboard warning lights or fault messages. Symptoms are strictly mechanical and acoustic, amplifying over time.

Source: NHTSA complaint ODI #11744430 · view all complaints for this vehicle at nhtsa.gov