I WAS TRAVELING EARLY SUNDAY MORNING AROUND 1 AM ON THE 152 EAST IN CALIFORNIA FROM THE 1 TO THE 101. AN SUV HAD BEEN FOLLOWING ME FOR A BIT AND THE CAR HAD ITS HIGH BEAMS ON. I STOPPED AT THE STOP SIGN FOR THE TRANSITION TO THE 101, AND THE CAR STARTED HONKING AT ME. I PULLED TO THE SIDE OF THE ROAD, AND A NICE LADY PULLED UP AND APOLOGIZED FOR FOLLOWING ME WITH HER HIGH BEAMS ON, BUT SHE SAID SHE DID IT TO MAKE SURE SHE COULD SEE ME BECAUSE THE BACK OF MY MOTORCYCLE WAS COMPLETELY DARK. I LOOKED BACK, AND LOW AND BEHOLD SHE WAS CORRECT. I THEN PULLED INTO A BUSINESS AND DID SOME CHECKS. THE WIRING LOOKED ALL GOOD, AND THE LEDS CAME ON WHEN I PRESSED THE BRAKE. I DECIDED TO RESET THE FUSE FOR THE TAIL LIGHTS. I THEN STARTED THE BIKE AND ALL THE LIGHTS CAME ON. AS I HAD 300 MILES MORE TO GO THAT NIGHT, I ADJUSTED A MIRROR DOWN AND IN TO MONITOR MY LIGHTS AND TOOK OFF. AT MY NEXT GAS STOP THE LIGHTS AGAIN WOULD NOT COME ON. I RESET THE FUSE AGAIN SUCCESSFULLY. AT THE NEXT GAS STOP THEY AGAIN DID NOT COME ON. THIS TIME I RESET THE FUSE FOR THE ECU. THE LIGHTS CAME ON, AND FOR DAYS AFTER I HAD NO MORE ISSUES. THE ISSUE DID COME BACK THOUGH, AND I FOUND THAT BY WIGGLING THE KEY IN THE IGNITION I COULD GET THEM TO COME ON. ONCE ON THEY SEEM TO COME ON EVERY TIME LIKE NORMAL UNTIL I DRIVE THE BIKE, PARK THE BIKE, AND REST IT FOR A BIT. THEN I HAVE TO WIGGLE THE KEY AGAIN TO GET THEM TO COME ON. I HAVE NOT TRIED RESETTING THE ECU AGAIN. *TR

Source: NHTSA complaint ODI #10614658 · view all complaints for this vehicle at nhtsa.gov