I was parking , I had my foot on the brake. I was at the parking curb stopped and my vehicle fully ecellerated , full speed crashing me into the building infront of me. the vehicle would not turn off even after exiting. this happened before however I only hit the curb as there was nothing else to hit. Im terrified. This could have EASILY KILLED SOMEONE. someone needs to review the data recorder in this vehicle IMMEDIATELY

Source: NHTSA complaint ODI #11706295 · view all complaints for this vehicle at nhtsa.gov

Vehicle was being driven at highway speed when loss of power occurred, vehicle moved to side of road and would not restart. Performed 12v capacitve procedure with no change. Hazard lights would not function, other 12v systems remained on.

Source: NHTSA complaint ODI #11747010 · view all complaints for this vehicle at nhtsa.gov

While attempting to park in my driveway, the vehicle experienced a complete loss of braking. The brake pedal did not stop the vehicle, and pressing the electronic parking brake switch had no effect. The vehicle continued forward and crashed through my closed garage door. The only reason it stopped was because it struck another vehicle parked inside my garage. That impact pushed the parked vehicle into my garage refrigerator, which then damaged the drywall on the garage wall adjacent to my bedroom. None of the safety systems functioned as expected. The parking sensors did not activate, there were no proximity warnings, and the automatic emergency braking system did not engage. After the crash, I exited the vehicle, but it remained powered on instead of shutting down automatically. It only turned off after I got back into the vehicle and exited multiple times. This incident involved a total loss of hydraulic and regenerative braking, an unresponsive electronic parking brake switch, failure of the parking sensors and automatic emergency braking, and failure of the high-voltage shutdown sequence upon driver exit, resulting in a structural collision. The vehicle has been towed to the dealership and is available for inspection. I am awaiting the dealership's diagnosis and have also reported the incident to my insurance company. No warning lights or messages appeared before the failure. This malfunction created a serious safety hazard and could have resulted in severe injury or death if anyone had been in the vehicle's path.

Source: NHTSA complaint ODI #11748156 · view all complaints for this vehicle at nhtsa.gov

The vehicle has a recurring door handle/door lock malfunction associated with Volkswagen safety recall 57J9. Symptoms include the vehicle unlocking and immediately re-locking, auto-unlock failure, and difficulty entering the vehicle. All four door handles were previously replaced under the recall (Feb 2025), but the malfunction recurred. On 01/26/2026 I delivered the vehicle to a Volkswagen dealer for recall repair; it was fully drivable at drop-off. During the recall-related software/coding procedure, the dealer reported the procedure could not be completed because the software would not accept the currently installed headlamp modules. A manufacturer Techline case was opened (SK-1561187) and the dealer reported they were advised to replace both headlamp assemblies due to part number incompatibility. After the attempted recall procedure/diagnostics, the vehicle became not drivable and has remained at the dealer continuously for over 30 business days. The manufacturer later denied warranty coverage and closed the case unless the owner pays to replace headlamps (approx. $3,887.79) in order to complete the recall procedure. The door locking/entry malfunction and inability to complete a safety recall repair creates a safety risk (potential inability to enter/exit and vehicle immobilization after recall service). The vehicle is available for inspection at the dealer.

Source: NHTSA complaint ODI #11723984 · view all complaints for this vehicle at nhtsa.gov

On 9/2/25, I gave my car to my local dealership to complete routine maintenance and to remedy a safety recall that had been initiated a few months prior. It was supposed to take one day to complete, but I was told that they were having trouble with a certain scan tool and would need technical assistance on their end before they could complete the recall. In short, it is now more than 3 months later (12/5) and I STILL do not have my car back. To the best of my knowledge, this is the problem: there is a scan tool that is necessary to complete the recall, and that this tool is malfunctioning. What the dealership keeps telling me is that they “continue to send tickets to their IT department, but don’t hear anything back.” A couple of times, they have heard back and have tried different updates or workarounds, to no avail. On multiple occasions, my service advisor has said that they “send tickets to IT daily in order to bother them enough actually do something.” I finally called VW customer care after my car had been with the dealership for 2 months, and the case was escalated to an RCM. She has tried following up with the dealership, as well as reaching out to the QTRL and QTM to see if there was any way to try to suss out the issue. To my knowledge, both of those have been fruitless. In fact, when the QTM visited the dealership to look at my car on November 26, all were hopeful there would be some movement. My RCM told me that the QTM was looking for updates to my case that “just weren’t there.” And that “the QTM on multiple occasions had looked for updates, but none were available.” To top things off, I spoke with my RCM on 12/2, and she said that my ticket had been closed due to “no updates in 5 days.” Infuriated, she reached back out that day to reopen the ticket. I was told today, 12/5, that the ticket STILL hasn’t been reopened. There is more, but I’m out of space. This many miscommunications and complete inaction is absolutely inexcusable at this point.

Source: NHTSA complaint ODI #11703327 · view all complaints for this vehicle at nhtsa.gov