Active distance assist inoperable, active brake assist functions limited, adaptive cruise control not working, lane keeping assist glitching. I was driving the vehicle home after purchase and the lane keeping assist was glitching, it was actively pulling the wheel to the left, like I was over the fog line (I wasn’t) and it was hard braking, Making driving very unsafe. I slowed down and got off at the next exit at a gas station to figure out what was happening. I put the vehicle in park and consulted the manual. I tried to turn off and back on all the systems, through the menu, noting worked. I shut the vehicle off and cleaned the areas around the sensors and the windshield, like the manual suggests. I went in to start the vehicle, and the message “service required do not shift gears” came on the dash. It was stuck in Park. I tried to get a tow truck, but had to wait 4 days, in a gas station parking lot before a tow company with a big enough truck, and skids, (because it was stuck in park) could come on Wednesday May 27. I got it towed to a repair shop. It shows the Code P179A77 direct select redundancy malfunction, they couldn’t fix it. It needs Xentry level diagnostics. The intelligent Servo Module, or direct select module failed/won’t shift from park. There is a recall that wasn’t fixed, I got a carfax from the dealer saying that there were NO active recalls. The recall is to update an all service modules. Yes it’s available for inspection, but it’s stuck in Park at the repair shop that can’t fix it in Riverton Wyoming. I called Mercedes Benz, and tried to get help because the active recall should fix these problems. They would not help. They will not sell me the part and code it to the vehicle because it’s part of their theft deterrent system. This has cost me thousands in flights, hotels, and countless hours trying to figure it out. The nearest Mercedes Benz dealership is 270 miles away, and towing will break me.

Source: NHTSA complaint ODI #11745840 · view all complaints for this vehicle at nhtsa.gov

The vehicle was involved in a collision on January 26, 2023. I am not claiming that the computer malfunction caused that collision. After the collision, while I continued operating the vehicle, problems developed with the vehicle’s computer, electronic control system, and instrument cluster. The instrument display could become dark or unavailable, and a CHECK ENGINE warning was present. This prevented reliable access to important information such as vehicle speed, warnings, and operating status. I brought the vehicle to a repair facility expecting a complete inspection and repair. An insurance inspector was expected to inspect and document the vehicle before repairs, but the inspector did not arrive after I waited for the entire day. I was told that the inspector would not be available the following days and would come only when available. Relying on the instructions I received, I left the vehicle at the repair facility. I authorized a complete repair, not an incomplete or partial repair. Nevertheless, the vehicle was only partially repaired, and the computer and instrument-cluster condition remained unresolved. A Mercedes-Benz dealer later documented a CHECK ENGINE condition and that the instrument cluster was showing dark, identified an instrument-cluster malfunction, and recommended further repair or replacement. I objected to taking back and operating a vehicle with an unresolved computer and instrument-display malfunction. I was concerned that losing access to speed, warning messages, or other critical information while driving could endanger me, my passengers, and other road users. I requested that the safety-related problem be fully diagnosed and repaired, but the vehicle was presented for return with the condition unresolved. The vehicle and its repair and diagnostic records should be obtained and examined to determine the cause of the electronic and instrument-cluster malfunction. The computer malfunction began approximately February 9-10, 2023.

Source: NHTSA complaint ODI #11761396 · view all complaints for this vehicle at nhtsa.gov

The Cross Wind Assist feature on the Mercedes Sprinter is extremely flawed and dangerous. It is also the only assistance system you cannot disable. We have brought it up to Merceds Benz mechanics and dealers and they are aware of the issues, but say there is currently no fix from corporate. I have had the system activate hundreds of times on short windy drives. The last incident was driving through Nebraska from Omaha to the Colorado border. The system engaged 600-800 times. It was windy, but the danger wasn't the wind, it was the cross wind assist feature. When the system engages (which appears to be random at times) it brakes one of the front wheels in the direction opposing wind gusts. When this happens your front nose dips sharply in that direction and makes the van rock violently. It does this particularly when other cars or semi-trucks are passing. Sometimes it does it back to back as if the system is engaging to correct itself. It's truly dangerous. I don't know how they released a vehicle with this feature. I was hoping a brand new van of this quality would make long drives feel safer. My experience has been the opposite.

Source: NHTSA complaint ODI #11583867 · view all complaints for this vehicle at nhtsa.gov

Power steering hose is too short from factory, mine came loose while driving and I lost power steering assist unexpectedly. In checking forums, this is an EXTREMELY common problem and has existed since at least 2018 - mine is a 2022.

Source: NHTSA complaint ODI #11710729 · view all complaints for this vehicle at nhtsa.gov

Front crash with no airbag deployment and no emergency braking. Currently at The Metal Shop in Warm Springs Va. Told by insurance it is totaled. Sustained mild concussion from head trauma. Head hit steering wheel. I notice many Sprinters for sale for parts after similar front end collisions. No warning lights.

Source: NHTSA complaint ODI #11751770 · view all complaints for this vehicle at nhtsa.gov